Xprog-m Software AUTH-0024-4 MC9S12HA/HY/P/VR/XS

When purchase please include xprog "Hardware ID"

Features

• Last update: 2017.11.14
• Compatible with XPROG-box software V5.8.5 or higher.
• Supported devices:
  
  • MC9S12G(A/N)16/32/48/64/96/128/192/240 P-FLASH
  • MC9S12G(A/N)16/32/48/64/96/128/192/240 EEPROM
  • MC9S12P32/64/96/128 P-FLASH
  • MC9S12P32/64/96/128 D-FLASH
  • MC9S12HA32/48/64 P-FLASH
  • MC9S12HA32/48/64 D-FLASH
  • MC9S12HY32/48/64 P-FLASH
  • MC9S12HY32/48/64 D-FLASH
  • MC9S12T64 FLASH
  • MC9S12VR EEPROM, FLASH
  • MC9S12XS64/128/256 P-FLASH
  • MC9S12XS64/128/256 D-FLASH
  • MC9S12XHY128 P-FLASH
  • MC9S12XHY128 D-FLASH
  • MC9S12XHY256 P-FLASH
  • MC9S12XHY256 D-FLASH
• Supported FLASH module versions
  
  • S12FTMRC32K1V1
  • S12FTMRC48K1V1
  • S12FTMRC64K1V1
  • S12XFTMR64K1V1
  • S12FTMRC96K1V1
  • S12FTMRC128K1V1
  • S12XFTMR128K1V1
  • S12XFTMR256K1V1
  • S12FTMRG16K1V1
  • S12FTMRG32K1V1
  • S12FTMRG48K1V1
  • S12FTMRG64K1V1
  • S12FTMRG96K1V1
  • S12FTMRG128K1V1
  • S12FTMRG192K2V1
  • S12FTMRG240K2V1
• Supported masks:
  
  • 0M01N, 0M34S, 0M04M, 1M04M, 0M05M, 0N95B, 0N51A, 0N75C, 1N75C, 0N48H, 1N48H, L42M
• Partial read/write EEPROM, D-FLASH, P-FLASH implemented (Use Options->Environment->Device command to select required FLASH block or blocks).
• Directly write implemented. No required erase before write for all FLASH types.
• Programming interface: in-circuit (BDM).
• Supported adapters:
  
  • no adapter required

MC9S12P Family

The MC9S12P family is an optimized, automotive, 16-bit microcontroller product line focused on lowcost, high-performance, and low pin-count. This family is intended to bridge between high-end 8-bit microcontrollers and high-performance 16-bit microcontrollers, such as the MC9S12XS family. The MC9S12P family is targeted at generic automotive applications requiring CAN or LIN/J2602 communication. Typical examples of these applications include body controllers, occupant detection, door modules, seat controllers, RKE receivers, smart actuators, lighting modules, and smart junction boxes.

The MC9S12P family uses many of the same features found on the MC9S12XS family, including error correction code (ECC) on flash memory, a separate data-flash module for diagnostic or data storage, a fast analog-to-digital converter (ATD) and a frequency modulated phase locked loop (IPLL) that improves the EMC performance.

The MC9S12P family deliver all the advantages and efficiencies of a 16-bit MCU while retaining the low cost, power consumption, EMC, and code-size efficiency advantages currently enjoyed by users of Freescale’s existing 8-bit and 16-bit MCU families. Like the MC9S12XS family, the MC9S12P family run 16-bit wide accesses without wait states for all peripherals and memories. The MC9S12P family is available in 80-pin QFP, 64-pin LQFP, and 48-pin QFN package options and aims to maximize pin compatibility with the MC9S12XS family. In addition to the I/O ports available in each module, further I/O ports are available with interrupt capability allowing wake-up from stop or wait modes.

MC9S12HY/HA Family

The MC9S12HY/HA family is an automotive, 16-bit microcontroller product line that is specifically designed for entry level instrument clusters. This family also services generic automotive applications requiring CAN, LCD, Motor driver control or LIN/J2602. Typical examples of these applications include instrument clusters for automobiles and 2 or 3 wheelers, HVAC displays, general purpose motor control and body controllers.

The MC9S12HY/HA family uses many of the same features found on the MC9S12P family, including error correction code (ECC) on flash memory, a separate data-flash module for diagnostic or data storage,
a fast analog-to-digital converter (ATD) and a frequency modulated phase locked loop (IPLL) that improves theEMCperformance. The MC9S12HY/HA family features a 40x4 liquid crystal display (LCD) controller/driver and a motor pulse width modulator (MC) consisting of up to 16 high current outputs. It
is capable of stepper motor stall detection (SSD), please contact a Freescale sales office for detailed information.

The MC9S12HY/HA family delivers all the advantages and efficiencies of a 16-bit MCU while retaining the low cost, power consumption, EMC, and code-size efficiency advantages currently enjoyed by users of Freescale’s existing 8-bit and 16-bit MCU families. Like the MC9S12HZ family, the MC9S12HY/HA
family run 16-bit wide accesses without wait states for all peripherals and memories. The MC9S12HY/HA family is available in 100-pin LQFP and 64-pin LQFP package options. In addition to the I/O ports available in each module, further I/O ports are available with interrupt capability allowing wake-up from
stop or wait modes.

MC9S12XS Family

The new S12XS family of 16-bit micro controllers is a compatible, reduced version of the S12XE family. These families provide an easy approach to develop common platforms from low-end to high-end applications, minimizing the redesign of software and hardware. Targeted at generic automotive applications and CAN nodes, some typical examples of these applications are: Body Controllers, Occupant Detection, Door Modules, RKE Receivers, Smart Actuators, Lighting Modules and Smart Junction Boxes amongst many others.

The S12XS family retains many of the features of the S12XE family including Error Correction Code (ECC) on Flash memory, a separate Data-Flash Module for code or data storage, a Frequency Modulated Locked Loop (IPLL) that improves the EMC performance and a fast ATD converter. S12XS family delivers 32-bit performance with all the advantages and efficiencies of a 16-bit MCU while retaining the low cost, power consumption, EMC and code-size efficiency advantages currently enjoyed by users of Freescale’s existing 16-bit S12 and S12X MCU families. Like members of other S12X families, the S12XS family runs 16-bit wide accesses without wait states for all peripherals and memories.

The S12XS family is available in 112-pin LQFP, 80-pin QFP, 64-pin LQFP package options and maintains a high level of pin compatibility with the S12XE family. In addition to the I/O ports available in each module, up to 18 further I/O ports are available with interrupt capability allowing Wake-Up from stop or wait modes. The peripheral set includes MSCAN, SPI, two SCIs, an 8-channel 24-bit periodic interrupt timer, 8-channel 16-bit Timer, 8-channel PWM and up to 16- channel 12-bit ATD converter. Software controlled peripheral-to-port routing enables access to a flexible mix of the peripheral modules in the lower pin count package options.