Product Description

KH100+ is a versatile handheld smart device, launched by Shenzhen Lonsdor Technology Co., which includes special features and functionality, such as identify&copy chip, access card cloning, simulate chip, generate chip, generate remote(key), generate a smart key(card), detect remote frequency, detect infrared signal, search induction area, detect IMMO, unlock Toyota smart key and etc

Lonsdor KH100+ Highlight:
1. Modern appearance design, in line with the operating habits of the public. 
2. Device system comes with operation instructions, easier for you to use. 
3. It covers almost all the functions of similar products in the market.
4. Built-in super sensor to collect data(over-range data collection).
5. Exclusive support for 8A(H chip) generation. 
6. Built-in WIFI module can connect to the network at any time
7. 4-pack remotes & smart key involved
8. Handy chip holder integrated,902MHZ supported
9. Toyota 8A Smart Key Direct copy to Add key(Latest Update)

How to register Lonsdor KH100:

Note:  After booting the device, please connect to WIFI  and enter the following process.

For New users:
1) For the first use, please prepare a common call phone or email to help complete the activation process, click OK to start.
2)  Boot the device and enter the registration activation process.
3)  Input user name, password. Confirm password, cellphone number, or email to obtain verification code. Then input the code to submit a registration.
4)  Account registered successfully, it will take 5 seconds to bind the device.
5) Successful registration, enter the system.

For Registered user(who has registered Lonsdor products before)
1) For the first use, please prepare a registered call phone or email to help complete the activation process, click OK to start.
2)  Boot the device and enter the registration activation process.
3)  Input your registered mobile number or email, password to obtain a verification code. Then input the code to submit login.
4) Account login succeeded, it will take 5 seconds to bind the device.
5) Successful registration, enter the system.

In addition, users who have already registered Lonsdor's product can directly choose [registered user] to activate the account. 

How to update Lonsdor HK100:

Enter settings menu
Connect the device to the network
Then choose [check for updates]
One-click for an online update!

Lonsdor KH100+ Functions:
When completing the registration activation, it enters below menu interface:

Identify Copy
Enter this menu, follow the system prompts to operate (as shown).

Access card cloning
Enter this menu, you can identify and copy the IC card, and generate the garage key as well. Follow the prompts to operate(as shown below).

Simulate Chip
Put KH100+'s antenna at the ignition switch(as shown), choose the corresponding chip type to simulate.

The device supports the below chip types:

1. 4D
2. 46
3. 48
4. 47

Generate Chip
Put the below types of chip into the induction slot(as shown), choose the corresponding chip to operate according to the prompts.

The device supports the below chip types:

1. 4D
2. 46
3. 48
4. T5
5. 7935
6. 8A
7. 4C
8. Chip conversion

Note: some chip data will be covered and locked.

Generate Remote
Enter [Generate key]->[Generate remote], choose the corresponding vehicle type to generate remote control(as shown) according to different regions.

Generate Smart key(card):
Enter [Generate key]->[Generate smart key] menu, choose the corresponding vehicle type to generate smart key/card(as shown) according to different regions.

Identify Coil:

1. Search smart induction area Connect remote key with remote connector, Put KH100+'s antenna close to the pre-determined position. If the inductive signal is identified, the device will continuously make sounds, please check if the position is right(as shown below).
2. Detect IMMO Connect remote key with remote connector, Put KH100+'s antenna close to key identification coil, and use the key to turn ignition ON. When the KH100+ buzzer beeps, it means the signal is detected.

Remote Frequency
Enter this menu, but the remote control at the device’s induction area to detect remote frequency.

Special function: detect infrared signal, unlock Toyota smart key, FT Toyota smart key, Charge key, More functions, to be continued.

Detect infrared signal: Put remote control at the infrared signal detection area, press the remote's button once. When the light on KH100+'s screen is on, it indicates there is an infrared signal, otherwise there is no signal(see below pic).

FT smart key: For Toyota or Lexus smart keys from Lonsdor, you can perform the following functional operations: read version info, modify key-value, unlock and upgrade program and etc. Put in the smart key, click [Select] to operate.

Unlock Toyota smart key/detect Toyota key status: Put in the smart key, click OK to operate.

Charge key: For a chargeable key with a battery, you can perform this function. Put in the key, click [OK] to operate.

Lonsdor KH100+ Device components: